Restrictive and Guide Bearings (EN1337-8) FE

SERVET USL FE series restrictive and guide bearings are designed to withstand only horizontal forces on the structure. These bearings are commonly used with laminated elastomeric bearings to resist horizontal forces. The bearings are designed to allow rotation around all axes, with a vertical displacement capacity of + 15mm – 10mm, which is very useful for future changes. This allows the structure to remain constrained during removal and replacement of laminated elastomeric bearings, reducing the need for major preparations.

Designed in accordance with EN1337-8

Load Capacities:

• Vertical load capacity 0kN
• Horizontal load capacity up to 2,300 kN
• Rotation capacity up to 0.01 Radians (21FE and 10FE)
• Rotation capacity up to 0.01 radians longitudinally and 0.04 radians transversely (31FE)
• + 15mm – 10mm vertical offset

Advantages:

• Fully welded sliding surfaces
• Certified EN compliant materials
• Vertical translation allows bearing change without the need for major preparations